Applications

You can use LUXAR^® SILVERSTAR^® ENplus insulated glazing wherever you need to combine a high level of transparency with energy efficiency. Full visibility and low U-values make LUXAR^® SILVERSTAR^® ENplus the product of choice for use in modern architectural applications that use large areas of glazing. Typical applications include: 

• Architectural applications (heat-insulating facades, winter gardens)
  

Dimensions

You can order LUXAR^® SILVERSTAR^® ENplus insulated glazing in various thicknesses – allowing you to achieve full room-height glazing.
 

Reflection

LUXAR^® SILVERSTAR^® ENplus insulated glazing comprises for example of two 4mm-thick float glass sheets, a 16mm spacer filled with argon gas and achieves a light reflection value of 3.5% on the exterior.

U-value and SHGC/g-Value

A 16mm spacer filled with argon gas enables LUXAR^® Silverstar^® ENplus insulated glazing to achieve a U-value of 1.1 W/m²K (EN 673) and an overall SHGC/g-Value of 61%.

Handling

Handle LUXAR^® SILVERSTAR^® ENplus insulated glazing with care and store glass  with its protective film (only where applicable) still attached, in an area protected from sunlight. Damage can be avoided by keeping supports, layers and suction tools clean. During installation, remove any traces of sealants right away. It is essential that you keep other building materials such as lime or cement away from glass surfaces, as these binders can harm the coating. If the glass does get dirty, wash away any spilled material with plenty of water and avoid rubbing the material, as dirt grains may scratch the glass.

Further information can be downloaded here.

Cleaning

To ensure your LUXAR^® SILVERSTAR^® ENplus insulated glazing stays clear, it should be carefully and regularly cleaned. We recommend using a soft cotton cloth, or a sponge and plenty of water. If needed, non-abrasive, neutral detergents can also be added to the water.

Further information can be downloaded here.

ISO standards

LUXAR^® SILVERSTAR^® ENplus insulated glazing is tested and certified to applicable ISO standards.

Abrasion ISO 9211-4
Adhesion ISO 9211-4
Humidity ISO 9022-2
Temperature ISO 9022-2
Solvent stability ISO 9211-4

Available formats

As delivery formats and lead time depend on your requested glass make up, please contact us for further information

to top